Andrea B. Posted May 25, 2015 Share Posted May 25, 2015 Blum, A.G. (2015) Liriodendron tulipifera L. (Magnoliaceae) Tulip Tree. Flowers photographed in ultraviolet and visible light. http://www.ultraviol...a-tulip-poplar/ Synonyms:Tulip PoplarYellow PoplarLiriodendron fastigiatum DippelLiriodendron procera Salisb.Liriodendron truncatifolium StokesTulipifera liriodendron Mill.Comment:A very tall, beautiful tree native to the Eastern US, the Tulip Tree produces masses of greenish-yellow tulip like blooms and lots of sticky nectar. The flower tepals have a bright orange chevron at the base. The tree is used for its wood or as a shade-producing ornamental. Reference:1. Missouri Botanical Garden (2015) Liriodendron tulipifera LINKhttp://www.missourib...kempercode=a878 SET 1Middletown, New Jersey, USA24 May 2015Flowering Tree Equipment [Nikon D600-broadband + Nikon 105mm f/4.5 UV-Nikkor] Visible Light [f/16 for 1/10" @ ISO-200 with Onboard Flash and Baader UVIR-Block Filter]These flowers and leaves blew off the tree during some gusty winds. Ultraviolet Light [f/16 for 10" @ ISO-400 with SB-14 UV-modified Flash and Baader UV-Pass Filter]Sticky, sweet-tasting nectar has dripped on two of the leaves at the top. Infrared Light [f/22 for 1/10" @ ISO-400 with onboard Flash and B+W 092 IR-Pass Filter]Insects are attracted to the nectar. SET 2Middletown, New Jersey, USA26 May 2007Flowering Tree Equipment [Nikon D200-broadband + Nikon 105mm f/4.5 UV-Nikkor] Visible Light [f/16 for 1/750" @ ISO-800 in Sunlight with Baader UVIR-Block Filter] Ultraviolet Light [f/16 for 1.5" @ ISO-800 with SB-14 UV-modified Flash and Baader UV-Pass Filter] Link to comment
msubees Posted May 25, 2015 Share Posted May 25, 2015 Nice! I did some also in NC 3 weeks ago. My friend did not know they had this tree in their yard. I saw flowers and told them the name, and shot one in UV but it was near evening. Link to comment
msubees Posted June 3, 2015 Share Posted June 3, 2015 I am having trouble with my Nex7 whitebalancing, it seems. This is done by custom WB with a virgin teflon square. My Nex7 always gave me an error saying WB outside range, but it seems many people get this error. The WB reports back about 3900k color temperature. My tulip poplar looked so different here. but it can also be my filters, I was using QB21 3.5 mm + ZWB1 (1.5mm, I think).I want to have the nice UV-blue.... http://ww2.beetography.com/var/resizes/UV/Liriodendron-tulipifera.jpg Link to comment
Andrea B. Posted June 4, 2015 Author Share Posted June 4, 2015 Perhaps I can suggest how to easily get the blue if I know what converter/editor you are using for your Nex7 ??Not all cameras will perfectly white balance in-camera. So we finish the job in the converter/editor if a certain "look" is desired. The shot is quite nice because you have captured some of the veining. I wouldn't worry too much about not having it blue. :(It looks like the shadow on the left side of the center parts could be easily lifted to reveal a bit of detail. Link to comment
msubees Posted June 5, 2015 Share Posted June 5, 2015 Andrea, I used PhotoNinja for this. I need to reread your instructions how to do a profile (forgot where you gave the steps) for a particular camera. Thanks, ZachPerhaps I can suggest how to easily get the blue if I know what converter/editor you are using for your Nex7 ??Not all cameras will perfectly white balance in-camera. So we finish the job in the converter/editor if a certain "look" is desired. The shot is quite nice because you have captured some of the veining. I wouldn't worry too much about not having it blue. :)It looks like the shadow on the left side of the center parts could be easily lifted to reveal a bit of detail. Link to comment
Andrea B. Posted June 6, 2015 Author Share Posted June 6, 2015 OK, knowing you use Photo Ninja, I can suggest you try the following 3 edits for the Liriodendron foto. Color Correction > Drag dropper over non-purple portion of petal > ApplyThis step will complete the white balance and move the purple/magenta towards a violet/blue. Color Enhancement > click on Magenta Patch > Hue Shift > -60That should shift the colour a bit more towards blue. Color Enhancement > click on Blue Patch > Saturation > +10 > ApplyThis adds a tiny bit more saturation. Link to comment
msubees Posted June 6, 2015 Share Posted June 6, 2015 Thanks, Andrea. Still way less blue than yours. I need to a better white balance too, perhaps. zach OK, knowing you use Photo Ninja, I can suggest you try the following 3 edits for the Liriodendron foto. Color Correction > Drag dropper over non-purple portion of petal > ApplyThis step will complete the white balance and move the purple/magenta towards a violet/blue. Color Enhancement > click on Magenta Patch > Hue Shift > -60That should shift the colour a bit more towards blue. Color Enhancement > click on Blue Patch > Saturation > +10 > ApplyThis adds a tiny bit more saturation. Link to comment
Andrea B. Posted June 6, 2015 Author Share Posted June 6, 2015 The amount and placement of the false-blue varies amongst the various Tulip Tree flowers I have photographed. If you look at my 2nd foto above, you can see that the left-most flower has little false-blue compared to the other two. Also we don't know how dependent the false-blue is on the age of the Tulip flower. Remember that some flowers have a fading UV signature with age (example: Myosotis). Then too, there may be some variation in the particular cultivars of Liriodendron tulipifera. We need a much larger sample space to make any conclusions. :) I think your Tulip flower looks just fine. If you want to make a Liriodendron tulipifera [Tulip Poplar]: Another Example posting with your Tulip, that would be nice. Link to comment
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now