Jump to content
UltravioletPhotography

Staeble-Werk 35mm f/3.5 Staeble-Lineogon


ulf

Recommended Posts

Finalized: Work in progress.

Last Update:


Staeble-Werk 35mm f/3.5 Staeble-Lineogon

 

Manufacturer: Staeble-Werk

Manufacturer's lens designation: STABLE-LINEOGON 1:3.5 / 35

Currently manufactured: No

Lens type: Manual focus, Prime, Wide Angle

Focal length: 35mm

Aperture range: f/3.5 – f/16, Manual, 10 blades

Design: 4 elements in 4 groups

Flange Focus distance: Mount dependable

Recommended magnification range: Up to 1x without reversing the lens.

Optimal magnification*: ?

Mount: M42 x 1.0, M39 x1.0**

Sensor format/coverage: up to 24mm x 36mm

Front filter: 40.5 mm x 0.75 mm

Introduction year: early 1960?

S/N of test object: 737665

 

* Optical design is said to be identical to the Noflexar 35/3.5. See that lens in the UV Lens Data for more information, if that rumor is true.

**Mount of test object

 

Lens review (VIS), on the web: http://forum.mflense...paxette-t69839.


Image of test object:

post-150-0-01951900-1610368204.jpg post-150-0-23781500-1610368211.jpg post-150-0-12717500-1610368219.jpg


Transmittance Summary

Definitions of the parameters below

  • Range: The STABLE-LINEOGON 1:3.5 / 35 lens transmits 0-68% in an increasing slope from 320nm to 400nm.
  • TVISmax (%) = 89%
  • T400nm (%) = 68%
  • T365nm (%) = 54%
    This moderate to high percentage is an indicator for reasonable exposure time under typical UV-pass filtration peaking around 365 nm.
  • λUV HMvis(nm) = 354nm
  • λUV HM400 (nm) = 345nm
  • λUV Zero (nm) = 320nm
    These three values indicate that the lens is working even for some limited upper UV-B photography with some filters and a few for this, suitable cameras.


Spectral transmission graphs:

UV-NIR, Staeble-Lineogon 35mm f/3.5

 

The transmission measurement accuracy into the end of NIR range is less good due to limitations in the light source.

 

UV, Staeble-Lineogon 35mm f/3.5

 

 

UV-Log, Staeble-Lineogon 35mm f/3.5

 

Numerical Spectra Data available: Pending

 

General comments about the UV-reach:

This lens is as said above supposed to be similar to the Noflexar 35/3.5, however the transmission-levels are not identical for my two lenses. The UV cut-on is very similar.

The difference, where the Noflexar is the better one of the two might be due to differences in the coatings.

I think my Staeble-Lineogon is older and coating technology improved much in the sixties.

 


Filters and how to use them on this lens:

The front filter thread is 40.5mm standard filter thread. A step-up filter ring might be needed.

 

It is also possible to use rear mounted filters, either in lens mount adapters for mirrorless cameras like Sony A-series etc, or placed directly in the camera.

 

An alternative, if space in the camera allows, is to putty-mount a filter directly against the lenses rear element mount ring.

The rear lens element is recessed and thus safe and the ring provides a good reference plane for orienting the filter normal to the optic axis.

 

My Omega 330W80 Improved Ø25mm, is mounted in a 27mm-filter ring and works well to mount as it is.


Handling and focussing:

This lens has a focusing helicoid that smoothly turns almost a full turn for focus at infinity to around 1m. To focus closer external bellows, focusing helicoids or extension rings are needed.

 

 

Flare and sun-stars:

TBD

 

Sharpness:

High according to net reviews. For UV ?

 

Lens distortion:

TBD

 

Chromatic Aberration / fringing in UV:

TBD


Image samples:

UV:

image

Filter:

 

UV, Fringing:

image

Filter:

 

UV, Fringing 100%:

image

Filter:

 

VIS+NIR:

image

Filter:

 

NIR:

image

Filter: long pass 800nm

post-150-0-24532500-1617361791.png

post-150-0-19911200-1617361801.png

post-150-0-05380500-1617361809.png

Link to comment

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...