Jump to content
UltravioletPhotography

Out of the Fire


Recommended Posts

Fun series with my favorite image first.

Collected using my homemade 39mm focal length single lens and a rear mounted 1.25" SvBony 0.5x focal reducer in a C-mount adapter at the mount of the lens. The focal reducer punches up the light, still gives a sharp center and helps to smooth out the background.

 

All images used 2 ExoTerra UVB lights directed at the very tinny flower, was only a couple mm wide.

 

Favorite image UVB 313bp25 with U330WB80 improved filter 13 seconds exposure at ISO 800, unknown but mostly open aperture:

post-188-0-40914800-1587196393.jpg

 

 

 

Other fun images from the series:

 

UVA 330WB80 improved filter only:

post-188-0-90581800-1587196574.jpg

 

8mm ZWB1 filter:

post-188-0-28396000-1587196590.jpg

 

4.32mm ZWB2 with 2mm ZWB1:

post-188-0-35196600-1587196610.jpg

 

4.5mm ZWB3 with 2mm S8612:

post-188-0-77648700-1587196650.jpg

 

Visible image of the flower:

post-188-0-45364100-1587196664.jpg

 

Alternative UVB image, but I like the first one better I think.

post-188-0-68764700-1587196853.jpg

Link to comment

I tested the focal reducer here:

https://www.ultravioletphotography.com/content/index.php/topic/3760-svbony-05x-focal-reducer-is-good-for-uv-but-not-magical/

 

Its passing 300nm, but looses the 2 stop increase advantage. Just equal exposure at 300nm with much wider field of view. I didn't test it at 254nm.

The lens may have been rated as UV grade, which would be real fused silica. So thats 190nm. But some of the fused silica elements I got are just quartz. All of them are great at 254nm. I still don't have a good deep UV light source. I am hoping I can get a 207nm light as they become more popular with the current state of the world.

 

I may need to test the focal reducer at 254nm now. A 200mm focal length concave element works ok with this element. But its not as central sharp as with the reducer. But the concave element allows for much wider field of view as it increases the back focus distance of the lens, while holding the same apearent field of view. The focal reducer decreases the back focal distance and thus pushes the element into mostly close up photography. As with my set up of 6mm mount adapter + 13mm aperture control ring + 19.25mm (m43rds flange) I already run into the back focus distance for infinity of just the 39mm focal length element.

But I do have a 12-19 helicoid on between the mount adapter and the aperture ring for these images. So I could have gotten much further back. It just wouldn't have been as interesting an image. The focal reducer fits in the dual M43rds to c-mount/M42 adapter. So do my c-mount modified concave elements. So I can play around.

I should test my concave elements immediately behind the 39mm element before the aperture ring to see if that works. That is a typical lens setup that I haven't tested yet.

Link to comment

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...